Hydro grab Fork S series (FMF.S)\t

This fork is a very robust model for the recovery of different wastes and can work in the most extreme conditions.

The jaw supports are in flat iron of 20 mm and the upper part of the fork is in full round of diameter 80mm. The hoses are protected by a 6 mm thick sheet metal box and a lower 8 mm sheet box reinforces the frame.

Available width from 1.70m to 2.80m.
Double-acting cylinders 70X40mm, stroke 220mm.
Wear rings with grease nipples.

Exists in several grapples.

• GRL.S.2E: grapple 20mm flat welded teeth with 2 blanks connecting the teeth to each other.

• GRL.S.2E.2P: Grapple in 2 flat teeth welded 20mm thick with 2 blanks connecting the teeth together (allowing the passage of connecting rods for kinematic Z).

S Series Multifunction Fork (FMF.S)

Fork made on the basis of 2 flat profiles FEM II or III receiving pallet type forks.

Multifunctional Fork Special Waste (FMF.SDR)

Fork hydrogriffe reinforced with electroformed fingers Ø55mm standard (or Ø70mm Mangano).

For more details

download the sheet in pdf

FOR CHARGERS AND TELESCOPIC FROM 100 to 250 HP

SEE AS WELL

 Special Multifunctional Waste Container (BMF.SDR)